How to Flash Stock Rom using Smart Phone Flash Tool

Home > Tutorials > Last update on January 21st, 2015

These are the instructions to Flash Stock Rom or any custom rom using Smart Phone Flash Tool (SP Flash Tool) on Windows Computer.

Requirements: Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.

Flash Stock Rom using Smart Phone Flash Tool

Step 1: Download and install Android USB Drivers on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Power Off Android Smartphone

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files:

Smart Phone Flash Tool Extracted Files

Step 5: Now Open Flash_tool.exe (you will find this from the extracted files in Step#6).

Open SP Flash Tool

Step 6: Once Smart Phone Flash Tool is launched, Click on the Scatter-Loading Button from the Right.

Smart Phone Flash Tool

Step 7: Now, Locate the Scatter File (you will find this file in the Stock Rom or any Custom Rom).

Locate Scatter File in SP Flash Tool

Step 8: Now, Click on the Download Button to begin the Flashing Process.

Begin Stock Rom Flash Process

Step 9: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detect your smartphone.

Step 10: Once Flashing is completed, a Green Ring will appear.

Green Ring in Smart Phone Flash Tool

Step 11: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, Now your Android Smartphone is successfully running the Stock Rom you have Downloaded.

Points to remember:

[*] The above tutorial only works with the Stock Rom or Custom Rom which comes with the Scatter file in it.

[*] Take Backup: Take a Phone backup before using the Smart Phone Flash Tool as because during the flashing process your personal data will be removed.

[*] We have shared the installable USB Drivers in this page, which works for almost any Android Smartphone.

The content is copyright to Rajesh Patel (

comments » contact »